Rollease RB560 Bracket Set for R16

The Rollease RB560 brackets are designed for use with Rollease R16 chain/clutch driven shades. The set includes the end plug bracket which has a notch for the end plug to sit on and a locking mechanism to keep it in place. The clutch drive side bracket has the tab. When mounting the shade you slide the clutch onto the tab. Then place the end plug side into the notch facing up and lock in place.

Rollease RB560 Bracket Specifications:
   •  Color: Zinc, White or Black
   •  Used with Rollease R16 Clutches
   •  Screw holes for ceiling or wall mounting
   •  Projection Distance: 1 5/8" *
   •  Places center of tube 1 5/8" off of mounting surface
   •  2.5" Wide Foot print
   •  Tab Width for Drive side – 0.6"
   •  Tab Length for Drive side – 0.7"

Note: Not compatible with the R24 clutch. The R24 clutch diameter is too large for this bracket. The RB580 or RBGAL must be used for the R24 clutch.

Roller Shade Component Dimensions

Rollease Clutch and Chain Shade Fabrication

* Projection Distance is the distance from the mounting surface to the center of the tube. Divide your roll diameter in half to figure out which bracket you need. If your roll diameter is 3.25" you will need the RB580 or RBGAL brackets. Use of the RB560 would result in the shade rubbing the wall. If you do not know what your roll diameter is you can calculate the roll diameter using the shade calculator below.

Shade Fabricator Calculator - (Excel Spreadsheet) - Calculates Roll Diameter, Shade Weight, Tube Deflection Etc.