Rollease SLB690R Skyline Shade Brackets - Zinc Color

The SLB690R is a roller shade bracket from the Skyline collection of Rollease. This single bracket is used for both the Pin End (SLPE53) and Motor or clutch end. Since both brackets are the same, you can mount the brackets and then decide what side to put the shade drive mechanism on and if you change your mind on the drive side you don't have to switch the brackets around.

Somfy LT30, R28, RU28 and ST30 motor to Skyline adapters are available that enable this bracket to be used with Somfy motors.

Rollease Skyline SLB690R Bracket Specifications:
   •  Designed for Rollease Skyline Components
   •  Color: Zinc (White Color Shown is Discontinued by MFG)
   •  Compatible with Somfy LT30 Motors w/ Adapter # SLAMLT30
   •  Compatible with Somfy R28, RU28 & ST30 Motors w/ Adapter # SLAMST30
   •  Each Bracket can be used for Pin-end or Drive End
   •  Mounting Holes for ceiling, back wall or side wall mounting
   •  Reinforced ribbed design prevents bracket flex
   •  Projection Distance: 2 7/8"
   •  2 7/8" Projection to Center of Shade Tube
   •  2 1/8" Wide Foot print
   •  Overall Dimensions: 2 1/8" W x 3 5/8" H
   •  SOLD PER EACH - NOT A PAIR

How to Fabricate a Rollease SKYLINE Roller Shade - Making the Necessary Deductions

* Projection Distance is the distance from the mounting surface to the center of the tube. Divide your roll diameter in half to figure out which bracket you need. If your roll diameter is 3" you will need the RB380 or RB390 brackets. Use of the RB360 would result in the shade rubbing the wall. If you do not know what your roll diameter is you can calculate the roll diameter using the shade calculator below.

Shade Fabricator Calculator - (Excel Spreadsheet) - Calculates Roll Diameter, Shade Weight, Tube Deflection Etc.