Rollease RB390 2-7/8" Projection Bracket Set - R3/R8 Clutch & LT30/ST30

The Rollease RB380 brackets are designed for use with Rollease R3/R8 clutches as well as Somfy and Rollease motors. The set includes the end plug bracket which has a notch for the end plug to sit on and a locking mechanism to keep it in place. The motor or drive side bracket has the tab. When mounting the shade you slide the drive side onto the tab and then place the end plug side into the notch and lock in place.

Rollease RB390 Bracket Specifications:
   •  Compatible with:
         -  Rollease R3 and R8 Clutches
         -  Somfy Motors: - LT30, R28, ST30, ST40
         -  Rollease DCRF Motors
   •  Screw holes for ceiling or wall mounting
   •  Projection Distance: 2 7/8"
   •  Places center of tube 2-7/8" off of mounting surface
   •  Typical Uses:
         -  Shades on 2" tubes
         -  Thick Material Rolls
         -  To create offset for 2 shades in 1 window space
   •  1.5" Wide Foot print
   •  Tab Width for Drive side – 0.4"
   •  Tab Length for Drive side – 0.4"

Roller Shade Component Dimensions

Rollease Clutch and Chain Shade Fabrication

* Projection Distance is the distance from the mounting surface to the center of the tube. Divide your roll diameter in half to figure out which bracket you need. If your roll diameter is 3" you will need the RB380 or RB390 brackets. Use of the RB360 would result in the shade rubbing the wall. If you do not know what your roll diameter is you can calculate the roll diameter using the shade calculator below.

Shade Fabricator Calculator - (Excel Spreadsheet) - Calculates Roll Diameter, Shade Weight, Tube Deflection Etc.