Save 10%

A-OK AM35-6/28-E-HD RF 120VAC Roller Shade Motor Kit with 2.5" x 84" Tube

Write a review
List price: $168.04
$151.24  Each
You save: $16.80 (10%)
AM35-6/28-E-HD-7F-Kit
+ −
Stocked Item - Typ. Ships within 1 Biz Days (Info ?)

A-OK - AC123-01 - 1 Channel RF Remote Control (White)
   •  Single Channel
   •  White
   •  Push Button Controls
   •  Wall Mount Clip

A-OK - AC123-02 - 2 Channel RF Remote Control (White)
   •  2 Channels
   •  White
   •  Push Button Controls
   •  Wall Mount Clip

A-OK - AC123-06 - 6 Channel RF Remote Control (White)
   •  6 Channels
   •  White
   •  Push Button Controls
   •  Wall Mount Clip

A-OK - AC123-16 - 16 Channel RF Remote Control (White)
   •  16 Channels
   •  White
   •  Push Button Controls
   •  Wall Mount Clip

A-OK - AC135-01 - 1 Channel RF Wall Switch (White)
   •  Single Channel
   •  White
   •  Push Button Controls
   •  Removable - Use as hand held remote
   •  Surface Mount Magnetic Wall Mount Base

A-OK - AC135-02 - 2 Channel RF Wall Switch (White)
   •  2 Channel
   •  White
   •  Push Button Controls
   •  Removable - Use as hand held remote
   •  Surface Mount Magnetic Wall Mount Base

A-OK - AC135-06 - 6 Channel RF Wall Switch (White)
   •  6 Channel
   •  White
   •  Push Button Controls
   •  Removable - Use as hand held remote
   •  Surface Mount Magnetic Wall Mount Base

All A-OK remote controls allow you to program the limits of the shade. You do not have to point the remote at the motor it every time you want to control it. You can control the shades in your living room from your bedroom completely wirelessly. The A-OK motor stores the limits set by the remote controls. With the momentary press of a button you can command the shade to go to the Full up or Full Down position. The advanced RF control technology offers the user simple individual or group control. All shades on the same channel will operate simultaneously. Each motor can be controlled by more than one remote control so you can have dedicated room controls and master controls for the whole home.
A-OK AC123-01 RF Remote Control - 1 Channel - White
A-OK AC123-01 RF Remote Control - 1 Channel - White AC123-01
AC123-01
A-OK AC123-02 RF Remote Control - 2 Channel - White
A-OK AC123-02 RF Remote Control - 2 Channel - White AC123-02
AC123-02
A-OK AC123-06 RF Remote Control - 6 Channel - White
A-OK AC123-06 RF Remote Control - 6 Channel - White AC123-06
AC123-06
A-OK AC123-16 RF Remote Control - 16 Channel - White
A-OK AC123-16 RF Remote Control - 16 Channel - White AC123-16
AC123-16
A-OK AC135-01 RF Wireless Wall Switch - 1 Channel - White
A-OK AC135-01 RF Wireless Wall Switch - 1 Channel - White AC135-01
AC135-01
A-OK AC135-02 RF Wireless Wall Switch - 2 Channel - White
A-OK AC135-02 RF Wireless Wall Switch - 2 Channel - White AC135-02
AC135-02
A-OK AC135-06 RF Wireless Wall Switch - 6 Channel - White
A-OK AC135-06 RF Wireless Wall Switch - 6 Channel - White AC135-06
AC135-06

Custom Cut Tube Length
As a free service we will cut the tube to a specific length to suit your needs. The tube width and fabric width are typically the same unless you have a really tall shade and want to leave a little extra room for material tracking as it rolls up on the tube.

Optional: FREE custom cut lengths cut to an accuracy of 1/16" +/- 1/32

We do not accept requests for cuts to 32nds, we do not use mm and decimals should have fractional equivalents on a tape measure.

Cut lengths can not be longer than the item length. Example: If the item length is titled as 24" or 2 Feet and you need 24 1/16", you will need to buy the next size up which should be 36" or 3 Feet.

Custom Cut Hem Bar Length
As a free service we will cut the hem bar to a specific length to suit your needs. Hem bars are typically cut to the same dimension as the tube and fabric unless you are going to seal the ends of the hem bar pocket. Sealing the ends prevents the hem bar from sliding out of the pocket. We recommend making the Hem Bar length 1" less than the tube length if you are going to seal the ends. This leaves 1/2" per side to seal the hem bar pocket.

Optional: FREE custom cut lengths cut to an accuracy of 1/16" +/- 1/32

We do not accept requests for cuts to 32nds, we do not use mm and decimals should have fractional equivalents on a tape measure.

Cut lengths can not be longer than the item length. Example: If the item length is titled as 24" or 2 Feet and you need 24 1/16", you will need to buy the next size up which should be 36" or 3 Feet.

Description

This shade motor kit includes everything you need to build a motorized roller shade except the fabric.

Included Items

   •  A-OK AM35-6/28-E 120VAC RF Roller Shade Motor

   •  A-OK Crown Adapter (35mm to 45mm): AM3545-C-ADA

   •  A-OK Crown Adapter (2.5" Tube): AM45-25-C

   •  A-OK Drive Adapter (2.5" Tube): AM3545-25-D

   •  Somfy 2.2" Projection* Motor Bracket: 9410665
        -  Supports Roll Diameters up to 4.15"

   •  Somfy 2.2" Projection* Idler Bracket: 9410635
        -  Supports Roll Diameters up to 4.15"

   •  Somfy Idler/End Plug: 9420800

   •  Rollease Idler/End Plug Adapter (2.5" Tube): RTA6U50

   •  Rollease RTEA6T - 2.5" x 84" ( +/- 1/4") Shade Tube w/Tape Applied
        -  Optional: FREE custom cut lengths cut to an accuracy of 1/16" +/- 1/32.

   •  Rollease RCBIHB - 1.5" x 84" ( +/- 1/4") Internal Hem Bar
        -  Optional: FREE custom cut lengths cut to an accuracy of 1/16" +/- 1/32.

 

Information and Tips

Recommended Tip to Tip Deduction
        -  2.5" Tube Using Components Listed (Equal Light Gaps): 2 3/4"
        -  2.5" Tube Using Components Listed (Max Compression on Idler): 2 1/8" (1.375" Motor Side, 0.75" Idler Side)

Tip to Tip is defined as the space that entire assembly (tubes, brackets, drives, idler etc.) needs to fit. This type of measurement is most often used for shades mounted within framed constraints.

Minimum Shade Width = 29.875" Tip to Tip
        -  Using Included Motor, Brackets, and End Plug

Maximum Shade Width = App. 144" Tip to Tip
        -  Maximum Width limitation is due to tube deflection not lifting capacity.

The use of the internal hem bar requires a material formed pocket at the bottom of the shade. The hem bar pocket is typically formed by stitching or fusing the material. Alternative methods like double stick tape and adhesives can be used with some experimentation.

The motor and end plug slide into the tube without the use of tools. The included roller shade tube features double stick tape to securely attach your roller shade material. We recommend cutting the shade material height so a minimum of 1.5" extra wraps of material is left on the shade tube when the shade is fully down. This prevents the material from directly pulling on the tape.

* Projection Distance is the distance from the mounting surface to the center of the tube. You would need to shim the brackets or use larger projection brackets if half the roll diameter is larger than the projection distance of the brackets. If you do not know what your roll diameter is you can calculate the roll diameter using the shade calculator below.

Actual shade size, tube size and material should be used to determine the true limits of a system. The Shade Fabricator Calculator below will predict tube deflection (and more) based on tube size, material weight, width and height. Tube deflection is bending of the tube and causes ripples in the hanging shade material.

Shade Fabricator Calculator - (Excel Spreadsheet) - Calculates Roll Diameter, Shade Weight, Tube Deflection Etc.

About the Motor

The A-OK AM35 shade motor is Radio Frequency based so you don't have to point the remote at it every time you want to control it. In fact you can control the shades in your living room from your bedroom completely wirelessly. The A-OK motor stores the limits set by the remote controls. With the momentary press of a button you can command the shade to go to the Full up or Full Down position.

Note 1: Unlike most other A-OK motors that we offer, this motor only has settable open and closed positions. This motor does not have programmable intermmediate stopping points.

Note 2: The limits of this motor are set mechanically and not with the remote. You will need to have access to the motor head to set the limits with the included tool.

A-OK AM35-6/28-E 120VAC Roller Shade Motor Specifications
   •  Power: 120VAC 1.1A
   •  Torque: 6Nm
   •  Lift Capacity - Not Including Tube Weight
        -  2" Tube: 53.11lb
        -  2.5" Tube: 42.48lb
   •  Motor Speed: 28 RPM
   •  Quiet Operation : 43dBa
   •  Soft Stop: No
   •  2 Configurable Stops (Open and Closed)
   •  Limit Setting Mechanically Adjusted
   •  Compatible with A-OK RF Control Technology (433.92 MHz)
   •  Motor Power Cable: 39" Non-Terminated
   •  Attached Antenna: 7.5"
   •  Compatible Tubes:
        -  Rollease RTEA5T 2" Tubes
        -  Rollease RTEA6T 2.5" Tubes
   •  Requirements for use - Not Included
        -  A-OK RF Remote
   •  Dimensions
        -  Overall: 22 7/8" L x 1.5" D - Insertion Dia.: 1.38"
   •  Weight: App. 3.04lb
   •  Warranty 5 years
   •  Motor Includes:
        -  Attached 10mm Stud Bracket Adapter (Removable)
        -  Limit Setting Tool

A-OK AM35-6/28-E Shade Motor Programming Instructions

Rollease Shade Tube Specifications

Features

Capacity:
  • 6Nm, 42.4lb on 2.5" Tube
Shade Drive:
  • A-OK AM35-6/28-E

Product Reviews

No posts found

Write a review