Please sign in so that we can notify you about a reply
Description
Basic but detailed product information and ordering instructions are provided. It is however difficult to put every aspect of roller shade ordering within a single product page. We encourage our customers to review the information contained in the following page link for more more details and technical information.
Roller Shade Technical Information
Somfy ST28 RTS Motorized Roller Shades Include
Hemmed shade mounted on tube with Somfy ST28 RTS Shade Motor not installed *, Rollease R Series Idler End Plug installed, Rollease R Series mounting brackets and Free Standard Ground Shipping to the 48 contiguous states.
Tubes Sizes
• Shades up to 96" width use 1.5" Rollease Shade Tubes.
Brackets
• Rollease RB360 Brackets are used on shades without Fascia.
* Motors are not installed in the shade tube to protect the motor during transit. The motors will ship separately with all necessary adapters installed and ready for easy installation. No additional hardware is required for the motor installation and they simply slide into the tubes.
We also sell components. The components used in our shades can be viewed in detail on their respective product pages.
Motor Information
The WireFree Somfy ST28 RTS Shade Motor is a Radio Frequency based 12VDC motor that is optionally powered with an external Lithium-ion battery pack and is designed to be used with roller shades.The ST28 has improved on prior versions by adding soft stop, adjustable speed, improved sound, and a LED Low Battery indicator. The ST28 motor uses the same power connections and adapters as the R28/RU28 motor so upgrading to the new version is easy. This Somfy motor is a simple, easy to use and easy to install solution for your shade motorization needs.
Special Features - The ST28 RTS Motor uses radio frequency based controls so you don't have to point the remote at it every time you want to control it. In fact you can control the shades in your living room from your bedroom completely wirelessly. This Somfy ST28 motor stores the limits set by the remote controls and memory is not lost when power is disconnected. With the momentary press of a button you can command the shade to go to the Full Up, Full Down and a customer specified preferred "My" position. No need to hold the button down and wait for the shade to reach the desired position. Each motor can be configured to be controlled by more than one remote control so you can have a remote in the bedroom and the living room to control the same shades. The Somfy RTS advanced RF control technology offers the user simple individual or group control as well as a host of automation options like Timers, Sun Sensors, RS232 Control, Ipad, Android etc.
Somfy ST28 RTS 12V Roller Shade Motor Specifications
• Operating Voltage 12VDC
• Nominal Current Draw: 1.0A
• Torque: 1.1Nm
• Motor Speed: 20 RPM Default (10-28 RPM Adjustable)
• Soft Stop ( Slows speed as the shade stops)
• Noise Level: < 49 dBa
• Lift Capacity - Not including Tube Weight
- 1.5" Tube: 12.98lb
• Built-In RTS Radio Frequency Control
• Compatible with Somfy RTS RF Control Technology
• Attached Motor Power Cable: 11.5"
• Attached Antenna: 6.5"
• Typical Control Range: 30' to 60'
• Dimensions
- Overall: 13.98" L x 1.88" W x 1.88" H
- Tube insertion length: 13.75"
• Weight: App. 11oz (0.7 lb)
• Warranty 5 years
• Somfy Part # 1241230
Tip to Tip deduction using 1.5" tube and Rollease R-Series components: 1 1/8"
Document Downloads
Somfy Sonesse 28 (ST28) Shade Motor Brochure
Somfy Sonesse 28 (ST28) Shade Motor Specifications
Somfy ST28 Roller Shade Installation Instructions
Somfy ST28 RTS Shade Motor Programming Instructions
Shade Coverings - Fascia, Valances, Cornices
Due to the possible options Fascia, Valances and Cornices are offered separately from the shades and can be purchased in our Shade Coverings page.
A couple exmples of the our offerings are listed below.
Classic IB Valance
The Classic IB shade valance provides a simple clean covering for your window treatment needs. This valance is offered in a large variety of materials so it can blend in or provide a nice textural contrast. This valance is constructed of shade material and has a hemmed pocket with an aluminum hem bar. One of the nice features of this valance is its soft nature. It can be easily moved out of the way to gain access to the window treatment behind it. The Classic IB Valance is available with a height of 5" to 8" and is offered with two different header options to suit your mounting needs. The 1" D x 3/4" H header can be used where you have adequate depth to mount the valance in front of the shade or you can choose 3 1/2"D x 3/4" H header that you would mount in the window frame before mounting the shade and then mount the shade to the header board. The valance is mounted to the header board using staples so it can be dismantled, modified and reassembled by the users to further suit their needs.
Fascia
The Rollease RFP Series aluminum fascia panel simply snaps into the fascia panel brackets for easy access to the roller shade components. The RFP series fascia panel can be used for inside or outside frame mount applications. This fascia panel covers the front and bottom to hide the shade assembly. The back and top of the fascia are left open. The use of this fascia panel forces the shade to use regular roll. Regular roll puts the shade material closest to the window. The 4" Fascia panel is our standard size offered which is compatible with our Chain & Clutch Shades, Somfy LT30, ST28, ST30, ST40 and ST50 Motorized Shades.
Lead Time
The lead time for fabrication of shades is typically 7 business days. The product ships directly from our shade manufacturer to you.
Return Policy
Shades are built to customer specific requirements and as such are special order items. We can not accept returns for custom built or special order items. This does not mean we are not able to help customers post purchase. Shades ordered too wide may be returned and cut down. Shades ordered too small can not be fixed. Some components of the order might also be returnable. Please contact us if you have questions about our return policy.
Warranty
Shade Fabrication: Limited Lifetime non-transferable warranty. Covers workmanship: IE Hemming, Attachment of material to the tube etc.
Shade Material: Phifer Materials carry a 5 or 10 year limited warranty against defects depending on the particular fabric. Fading and changes in color are not warranted. Interior shade control fabrics must be used in interior applications.
Rollease Components: Rollease provides a Limited Lifetime Warranty on their Clutch mechanisms and a 10 Year limited warranty on other components.
Somfy Products carry a limited 5 Year Warranty against defects and failure when used in interior shading applications. Products must comply to technical design and usage standards. Batteries are not covered under any warranty.
All warranties stated herein are limited abbreviated warranties and consumers should check with component manufacturers for complete warranty terms. As is the case with all warranties. AV Outlet, SOMFY, Phifer, Rollease etc shall not be liable for any injury, loss or damage, direct or consequential, arising out of, or the inability to use the equipment. Before using, the buyer and/or the ultimate user shall determine the suitability of the product for its intended use and the user assumes all risks and liability in connection therewith. The consumer is responsible for returning the product for warranty servicing.
Our Main Custom Roller Shade Index Page
Features
Shade Drive:
- Somfy ST28
Product Reviews
No posts found
