VI-P80 Vibration Isolators 80lb Capacity

The VI-P series rubber vibration isolators are a medium sized vibration isolator that can be used for a variety of applications. The moderate size combined with the nice variation in available weight capacities allows this design to support couches, chairs, platforms etc. Vibration isolators are used to isolate vibrations from their surrounding environment and when used in applications where vibration is desired these isolators allow the maximum amount of vibration to be achieved and are the perfect choice for home theater effects produced by. The VI-P vibration isolators will allow the chair, couch platform to vibrate more freely and reduce the the amount of vibration energy transferred to the floor. The VI-P series vibration isolators are offered in several weight capacities to provide the correct amount of vibration. The sizing of the vibration isolators should be targeted at 50% to 75% of their load bearing capacities. Using an oversized vibration isolator will result in very little vibration isolation and using an isolator that is too small may result in too much vibration or fatigue in the isolator.

VI-P80 Rubber Vibration Isolator Specifications:
   •  Rubber Isolator designed for individual seating and platforms
   •  Metal plate with 2 - 0.34" Diameter mounting holes on 2 3/8" C to C
   •  5/16 -18 Inset Centered Thread Hole
   •  All surfaces are covered in rubber
   •  Can be used in either orientation
   •  Neoprene Rubber can be used Indoors or Outdoors
   •  Durometer Hardness 50A (Medium Hard by Classification)
   •  Load Capacity Per Each - 80lb (As Specified by MFG)
   •  Deflection at Max Capacity: 0.12"
   •  Base Length: 3.13"
   •  Base Width: 1.75"
   •  Height: 1"
   •  Top Diameter: 1.20"
   •  Sold as a QUANTITY OF 1