IRCB-DWPL Wall Plate IR Connecting Block

The IRCCB-DWPL is a decorator style amplified IR connecting block. IR Connecting blocks are the brains behind an IR Remote Control network. The IR connecting block enables the user to remotely control DVD Players, AV Receivers, Projectors, etc from a distributed IR control system. The IRCB4 usually is placed near the equipment rack. IR Flasher/Emitters are connected to the IR connecting block and the equipment to be controlled. The IR Receiver is remotely located at a convenient control point up to 1000 feet away from the equipment rack and connected to the IR Connecting Block via CAT5 or other 3 conductor wire. The IRCB-DWPL features 3 flasher/emitter output connections via 3.5mm plugs and one IR Receiver input.  The flasher/ emitter ports can be connected to single or dual flasher emitters enabling control of up to 6 pieces of equipment in a remotely located rack. The removable screw terminal allows up to 3 IR Receiver to be connected.

Works with all IR components that have: IR (or S Signal), V+ and G Connections including Xantech, Niles, Russound, Direct Connect Etc. (12VDC powered).

IRCB-DWPL Wall Plate IR Amplifying Connecting Block Specifications
   •  The Brains of the IR Network - Everything connects to this block
   •  Three Front IR Flasher/Emitter Ports: 3.5mm Female
   •  12VDC Power Input Connector: 2.1mm Female
   •  IR Receiver Connection via backside Screw Connections
   •  Removable Connector Screw Terminal Connector for IR Receivers
   •  Compatible with most 12VDC IR networking components
   •  Can be connected in parallel with up to 3 total IR Receivers
   •  Works with nearly all remote controls
   •  Mounts in standard switch boxes
   •  Includes: Decorator Trim Plate and mounting hardware
   •  12VDC Power Supply Required - Not Included
   •  Optional: 12VDC 500ma 2.1mm Power Supply

View the IRCB-DWPL Wall Plate IR Connecting Block Instructions