IR-EXT-RF-BI Bi-Directional Wireless RF IR Repeater Kit

Bi-Directional Wireless IR Repeater
For users looking to control IR devices inside a closed cabinet or away in another room, the bi-directional wireless IR repeater is the solution. For IR based devices, line of sight is required when controlling through an IR remote control. If you're locating the IR based device, whether this is a Blu-ray player, DVD player, etc. in a closed cabinet or another room where line of sight is not available, then our device allows control of these IR devices by providing line of sight. It does this wirelessly, allowing customized setups, while expanding the IR range up to 490 feet (150 meters).

Point to Point (Local)
In a typical point to point setup that is done locally, the IR devices you want to control are in a closed cabinet or not within line of sight, but placed in close proximity to your television or receiving device. This type of setup only requires one unit to be used as it does not need to be used wirelessly. In this setup, all you would need to do is plug the unit into an available USB charging port (usually provided on television sets or use a USB charger) and then plug the IR emitter cable into the IR Emitter port of the unit and then point the IR emitter eye at the device you want to control. Then you would plug the IR target cable into the IR target port. This is where you will be pointing the remote control towards the IR target eye. Note that in the setup, a dual IR emitter cable is used. By default, the package includes a single IR emitter cable, but the dual IR emitter cable can be purchased separately.

Zone Control
Unique to this wireless IR repeater is the ability for zone control. Zone control allows you to set different groups of devices for control. A switch is included in the back of the unit, allowing you to set up to 10 different zones. This allows you to specify unique groups of devices for control, useful for cases where you don't want to accidentally control two devices in the same space.

Bi-Directional Control
Since the unit includes both the IR emitter and IR target ports, this allows control in both directions. All you would have to do is plug in the IR emitter cable and IR target cable into the ports for bi-directional use.

IR-EXT-RF-BI Wireless Bi-Directional RF IR Repeater Specifications
   •  RF frequency - 915MHz
   •  Power - USB
   •  Compatible with 20-60Khz IR frequencies
   •  Wireless RF Range - up to 490' (150M)
   •  Opertational Modes
          - Point to Point (Local)
          - Point to Point (Wireless)
          - Zone based - 10 Channel
          - Bi-Directional
   •  IR Receiver Connection - 3.5mm Plug
   •  IR Emitter Connection - 3.5mm Plug
   •  1 Year Warranty
   •  Includes:
          - IR RF Base - Qty: 2
          - Single IR Flasher/Emitter
          - Single IR Receiver

IR-EXT-RF-BI - Wireless Bi-Directional IR Repeater Instructions