The ViaBlue "Neon" braided sleeve, aside from the obvious aesthetic enhancements, helps protect cables against abrasion, bending and incident light radiation. The braided sleeve manufactured by ViaBlue is designed significantly differently than competing braided sleeves. The approach taken here provides nearly a one size fits all scenario. This is achieved by using expanding fabric fillers within the sleeve along with monofilaments. As the sleeve expands and contracts so does the fabric. This dramatically reduces the see through effect found in monofilament designs.
ViaBlue Neon Small Braided Sleeve Specifications
• Color: Neon - Black Body with Gray, Green and Yellow Accents
• Size: Small - Approximate Nom. Equivalent 1/8"
• Monofilament Polyethylene Terepthalate (PET) and Fiber Fillers
• Expanding Fiber Fillers Provide Excellent Coverage
• UV Resistant
• Moderate Cut and Abrasion Resistance
• Recommended for Cables Diameters 2mm to 6mm (0.078" to 0.236")
• App. Single Wall Thickness: 0.56mm (0.022")
• Melting Point: 255 C
• ViaBlue Sku: 44276
• Sold Per Foot
All lengths ordered will be continuous unless otherwise notified.
Ordering Note: As the cable is placed into the sleeve it will cause the length of the braided sleeve to shrink. The amount of length lost will depend on the size of the cable. The table below is a guideline for required lengths. We recommend ordering more to be on the safe side.
Approximate Length Requirements |
|||||
Cable |
2mm |
3mm 0.118" |
3.7mm 0.145" |
4mm 0.157" |
6mm 0.236" |
X Factor |
1.00 |
1.05 |
1.08 |
1.10 |
1.40 |
No posts found