Somfy Sonesse 50 504 120VAC Standard - Wired - Roller Shade Motor
  • Somfy Sonesse 50 504 120VAC Standard - Wired - Roller Shade Motor
  • Somfy 1030061 Sonesse 50 504 Motor Star Head

Somfy 1030061 Sonesse 50 (ST50) 504 Std. 120VAC Wired Shade Motor Kit

Product Code: 1030061-Kit



Sold Per - Piece/Item


Product Discontinued - No Longer Available


Somfy Sonesse 50 Standard Wired Shade Motor Kit with Optional Components

The Somfy Sonesse 50 (ST50) 504 Shade Motor is an ultra-quiet 120VAC motor designed for specific use with roller shades. The Sonesse ST50 motors are engineered with superior noise reduction technology and from a distance of 3 feet, are barely heard. The heavy duty Sonesse 50 motor is designed for tubes as small as 2" in
diameter and does not have any practical limits with respect to it use with roller shades.

The Standard Version of the Somfy ST50 Motor is controlled via wired wall switch and can be optionally control via RTS, IR or RS232 with add-on modules. This is a simple, easy to use and easy to install solution for your shade motorization needs. The upper and lower limits are programmed for the shade stopping position by the use of two simple push buttons on the motor head. The shade can be commanded to move to the set limits with the use of a maintained command.

Somfy Sonesse 50 (ST50) 504 Standard Roller Shade Motor Kit Specifications
   •  Motor Series: 500
   •  Motor Version: 504S2
   •  Torque: 4Nm
   •  Operating Voltage 120VAC
   •  Normal Current Draw: 0.95A
   •  Lift Capacity
        -  2" Tube: 35.2lb
        -  2.5" Tube: 28lb
   •  Motor Speed: 32 RPM
   •  Ultra-Quiet Operation : 44dBa
   •  Rubber Drive Provides Quite Operation
   •  Heavy Duty Applications
   •  Standard Wired Control
   •  Star Head Design Locks into Brackets
   •  Removable Control Cord - Supplied w/ Open Ends
   •  Compatible with 2" and Larger Shade Tubes - Adapters may be required
   •  Requirements for use - Not Included
        -  120VAC Power
        -  Wired Control Switch
        -  2" or Larger Roller Shade Tube
        -  Somfy Motor and Idler Brackets
        -  Crown and Drive Adapter to Match Tube
   •  Dimensions
        -  Overall: 28.5" L x 2.25" Dia.
        -  Insertion Dia.: 1.82"
        -  Tube Insertion Length: 27.625" App.
   •  Weight: App. 5.62lb
   •  Warranty 5 years
   •  Includes: Motor, Drive Stop and Power Cord
   •  Somfy Part # 1030061-Kit

Minimum Shade Width
        -  App. 30.25" Tube Length with 2" Idler # 9013592
        -  App. 32.25" Tip to Tip Including Brackets with 2" Idler # 9013592
        -  App. 33.25" Tube Length with Universal Idler # 9420800
        -  App. 35.25" Tip to Tip Including Brackets with Universal Idler # 9420800

Optional Items
   •  Crown and Drive Options
        -  Drive for 9206088 Hard Clip Drive for 2" Smooth Wall Tubes - Crown Not Required
        -  Rollease RTA6U50 Crown and Drive Kit for 2.5" Rollease Tubes
        -  Rollease RTA7U50 Crown and Drive Kit for 3.25" Rollease Tubes
   •  Somfy Wired Motor Control Switch - (SPDT)
        - Somfy 1800373 Maintained Decorator Paddle Switch - White
        - Somfy 1800374 Maintained Decorator Paddle Switch - Ivory
   •  Somfy Star Head Motor Brackets
         -  Somfy 9410651 Star Head Motor Bracket with Angle Plate
         -  Somfy 9910021 Star Head Motor Bracket No Angle Plate
   •  Somfy 10mm Shaft Idler End Brackets
         -  Somfy 9410635 10mm Idler End Bracket with Angle Plate
         -  Somfy 9012657 10mm Idler End Bracket No Angle Plate
   •  Rollease Roller Shade Tubes (SOLD SEPARATELY)
        -  Rollease RTEASW5T - 2" SMOOTH WALL Shade Tube with Tape Applied - Product Link
        -  Rollease RTEA6T - 2.5" Shade Tube with Tape Applied - Product Link
   •  Idler End Plugs for the Shade Tube - Opposing Motor End of the Tube
           -  Somfy 9013592 10mm Collapsible Idler for 2" Smooth Wall Tube
           -  Somfy 9420800 10mm Universal Idler with 920688 Drive for 2" Smooth Wall Tubes
           -  Somfy 9420800 10mm Universal Idler and RTA6U50 for 2.5" Rollease Tubes
           -  Somfy 9420800 10mm Universal Idler and RTA7U50 for 3.25" Rollease Tubes
   •  Hem Bars (SOLD SEPARATELY)
        -  Rollease RCBIHB Internal Hem Bar - Product Link
        -  Rollease HB12A External Anodized Aluminum Hem Bar Kit - Product Link
   •  Misc. Items - Shade Tape 1/2" x 36yd Double Sided Tape

Component Spec Sheets & Information
* Projection distance is the distance from the mounting surface to the center of the tube. Divide your roll diameter in half to figure out which bracket you need. Somfy standard brackets have a 2.2" projection. If your roll diameter is 4" or larger you will need to create a custom bracket solution using the "No Angle Plate" motor and idler brackets. If you do not know what your roll diameter is you can calculate the roll diameter using the info below but you need to know your material thickness.

Calculate Your Roll Diameter
Circumference of Tube = Diameter of Tube X 3.1417
Height of Window Plus 12" = Total Material Height
Total Material Height divided by Circumference = Numbers of Wraps of Material
Number of Wraps of Material x Material Thickness x 2 = Total Added Thickness to Roll Diameter
Total Added Thickness of Roll Diameter + Tube Diameter = App. Roll Diameter with Material Rolled Up

Somfy Sonesse 50 with 2.5" Rollease Drive Installed
Somfy ST50 Motor with 2" Drive Installed

Somfy AC Std. Motor and Switch Wiring Instructions - PDF Document
Sonesse 50 ST50 Roller Shade Motor Installation Data sheet - PDF Document
Rollease External Hem Bar Instructions - PDF Document
Somfy Sonesse 50 ST50 Roller Shade Motor - Brochure - PDF Document
Shade Installation Instructions
- PDF Document

Special Order Item - This item will need to be brought into stock from Somfy prior to us shipping the product to you. Somfy does offer a drop ship service but this comes at a fee imposed by Somfy. Optionally you can select to have us drop ship this item from Somfy to you for faster service. Please note the drop ship service fee is a per order fee not a per item fee. If you are ordering multiple items or more than one of the same item you only need to add the drop ship fee to the cart once for the entire order. For instance if you want 5 of these drop shipped: Select Qty: 1 with the Drop Ship Option Selected then Select Qty: 4 without the drop ship fee selected. All 5 will be drop shipped and the fee will only be added once. Special Order Items receive Full Warranty Services but are Not Returnable for Refund.



Send to friend

Type the characters you see in the picture above.